Document 800-01802 Rev B
5
02/09
Important Safety Information
•
Read and keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
•
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
•
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
Precautions
•
Please ensure that your installation area can support the weight of the
camera.
•
Do not install the camera in extreme temperature conditions. Only use
the camera where temperatures are between -13
°
F and 122
°
F (-25
°
C
and 50
°
C). Be especially careful to provide ventilation when operating
under high temperatures.
•
Do not aim the camera towards an extreme light source to prevent
damaging the CCD.
•
Do not touch the camera bezel (front glass plate).
•
Do not drop the camera or subject it to physical shock.
•
Do not expose the camera to radioactivity.
•
Do not use a strong or abrasive detergent when cleaning the camera.
Caution
The light emitted from the near-infrared light emitting
diodes (LEDs) provides illumination over a wide area.
This light is not considered a risk to the unshielded
human eye. However, as with any light source, it is
recommended that normal precautions be taken to
avoid unnecessary exposure. For example, avoid
staring into the beam or viewing directly with optical
instruments at close range.
Note
IR LEDs could be warm after prolonged use.
