Document 800-01802 Rev B
17
02/09
Configuring Sync Control/Line-lock
Use this screen to synchronize the vertical interval sync pulse of your camera
with other equipment to reduce the effect of picture roll on the monitor.
Note
Line-lock mode is only available when using 24 VAC power.
Figure 8
Sync Control Setup
Menu Item Description
INTERNAL
When line-lock is not required.
LINELOCK Adjusts the vertical phase (VPH):
VPH: 000~359 (factory default is 0)
RETURN
Press MENU to return to the Setup menu.
<<SYNC. CONTROL>>
SYNC
INT (L/L)
RETURN
!
