manualshive.com logo in svg

Honeywell Excel 50, User Manual, Page: 53 / 72

Share
Download
Honeywell Excel 50 User Manual Download Page 53

EXCEL 50 MMI - USER GUIDE 

 45 

EN2B-0222GE51 

R0216 

You can proceed to the second screen of the ALARMS procedure using the 
RIGHT and LEFT ARROW keys. 
 
Move the cursor to the desired item, e.g. "Point in alarm", and confirm. A screen 
resembling the left one shown in Fig. 64 will then appear. 
 

 

Fig. 64. Screen displaying all points in alarm 

 
This screen displays all the points currently in alarm in the list box. To access 
more information about a specific alarm, use the ARROW keys to move the cursor 
to the appropriate alarm name and confirm. The resultant screen will have the 
appearance of the one shown to the right in Fig. 64. 
 
Alarm information (comprising the date, time, alarm name, value/state and alarm 
reason) is displayed. Press CANCEL to return to the previous screen. 
 

NOTE:

  The same operating method as described for "Point in Alarm" applies to 

the "All Alarms", "Critical Alarms" and "Non-Crit. Alarms". 

 
If the item "Bus-wide alarms" has been chosen from the alarm menu, a screen 
resembling Fig. 65 will appear ("

#

" represents a number from 1 through 30). 

 

 

Fig. 65. Buswide alarms 

 
This screen shows a list of all controllers connected to the bus. Move the cursor to 
the appropriate controller and confirm. A list box with all alarms in the alarm buffer 
of the specified controller will be displayed in a screen resembling the left screen 
shown in Fig. 64. Move to the appropriate alarm and confirm. 

Summary of Contents for Excel 50









































































Reviews:

No comments