manualshive.com logo in svg

Honeywell Excel 50, User Manual, Page: 12 / 72

Share
Download
Honeywell Excel 50 User Manual Download Page 12

 

EXCEL 50 MMI - USER GUIDE 

EN2B-0222GE51 R0216 

4 

Fast-Access Keys 

The use of the fast-access keys is summarized below. 

 

PLANTS: Displays a list of the selected plant components and their 
current states. 

 

TIME PROGRAMS: Displays a list of configured time programs and 
provides all time schedule customization options. 

 

SYSTEM TOPICS: Available only in access level 3. Provides system 
settings and application parameters. 

 

ALARMS: Displays alarm information on alarm history, points currently in 
an alarm condition, critical alarms, and non-critical alarms. 

 

LCD Display 

The LCD display can present four lines of alphanumeric text, with 16 characters 
per line, and has been provided with back-lighting to improve legibility. 
 
Screen usually contain one or more edit fields and display fields interspersed 
among its four lines. The 

current edit field

 is indicated by the presence of a 

cursor (arrowhead) to the left of it. In the case of edit fields consisting of several 
digits, the current digit will be flashing. See Fig. 2. 
 

 

Fig. 2. Typical screen with cursor and edit fields 

 

NOTE:

  The screens shown in this User Guide are 

examples

 (taken from 

application HE01) and may differ slightly from the screens visible on your 
Excel 50 MMI. 

Summary of Contents for Excel 50









































































Reviews:

No comments