manualshive.com logo in svg

Honeywell Excel 50, User Manual, Page: 41 / 72

Share
Download
Honeywell Excel 50 User Manual Download Page 41

EXCEL 50 MMI - USER GUIDE 

 33 

EN2B-0222GE51 

R0216 

 

NOTE:

  The date must be entered in the format determined by the engineering 

units: for example, 23. July 1997 must be entered as 23.07.1997 for 
Europe and 07/23/1997 for the U.S. Press the CANCEL key to abort the 
operation or to cancel an incorrect entry before the ENTER key has been 
pressed. The value previously displayed will be restored. 

 

NOTE:

  The time must be entered in the following format: HH:MM in 24-hour 

clock format; for example: 9:30 a.m. must be 09:30 and 9:30 p.m. must 
be 21:30. Press the CANCEL key to abort the operation or to cancel an 
incorrect entry before the ENTER key has been pressed. The value 
previously displayed will be restored. 

 

Daylight Saving 

The actual dates on which daylight savings time starts and ends in a given year 
must be changed on an annual basis. Move the cursor to the "

Daylight 

Saving

" field and confirm. The following screen appears. 

 

 

Fig. 46. Entering the dates for daylight savings time 

 
Using the PLUS or MINUS keys, you can now enter the dates on which daylight 
savings time starts and ends for the current year. Move from field to field using the 
ARROW keys and confirm. 
 

NOTE:

  You can press the CANCEL key to abort the operation or to cancel an 

incorrect entry before it has been confirmed using the ENTER key. The 
previously-displayed value will then be restored. 

 
Upon completing entry of the daylight savings start and end dates or of the date or 
time, the following screen will appear: 
 

Summary of Contents for Excel 50









































































Reviews:

No comments