Honeywell Dolphin CN80G User Manual Download

Page: 74 / 112

Dolphin CN80 Mobile Computer

Make an Emergency Phone Call

You can use the phone to make an emergency phone call even if the SIM card is
missing from your phone. The phone shows no service but the call still goes
through if you dial certain emergency numbers (e.g., 112, 911, 000, 08, 118, 119,
and 999).

Configure Phone Settings

You can customize settings for the phone, including the ringtone, voicemail
options, keypad tones, Internet call settings, and other options.

1. Open the phone app

2. Tap

next to the microphone icon at the top of the screen.

3. Select

Settings

. The Call settings menu appears.

4. Change phone settings as necessary.

Note:

Available settings vary depending on your cellular carrier and phone plan.

Summary of Contents for Dolphin CN80G

















































































































Search results

Summary of Contents for Dolphin CN80G

Reviews:

Related manuals for Dolphin CN80G

Brands by name

Popular brands

Honeywell Dolphin CN80G, User Manual

Search results

Summary of Contents for Dolphin CN80G

Reviews:

Related manuals for Dolphin CN80G

Brands by name

Popular brands