manualshive.com logo in svg

Honeywell Dolphin CN80G, User Manual

Share
Download
Honeywell Dolphin CN80G User Manual Download Page 102

92

Dolphin CN80 Mobile Computer

Install OTA Updates

To use the HUpgrader to install an OTA update file downloaded from the 

Technical 

Support Downloads Portal:

1. Swipe up from the bottom of the Home screen to access all apps.

2. Tap 

Settings

  

> 

Provisioning mode

 under 

Honeywell Settings

.

3. Tap the toggle button to turn Provisioning mode 

On

.

4. Save the OTA file (*.zip) in the following folder on the CN80 computer:

•

Internal shared storage\Download

5. Tap 

HUpgrader

 

 to open the Honeywell Updater app.

6. Tap   in the upper right corner, and then tap 

Select OTA from storage

.

7. Select the storage location (i.e., Internal Storage) where you saved the file.

8. Tap the OTA update file. The computer examines the file, and then starts the 

installation.

9. Once the installation is complete (100%), select 

OK

 when prompted to 

Reboot

 

the computer. The computer reboots and finishes the update.

Summary of Contents for Dolphin CN80G

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands