manualshive.com logo in svg

Honeywell Dolphin CN80G, User Manual

Share
Download
Honeywell Dolphin CN80G User Manual Download Page 69

Dolphin CN80 Mobile Computer

59

6. Select a cellular carrier.

7. Tap 

Apply

 and then 

OK

 to verify the change.

8. Tap 

OK again 

when the “Settings are saved” message appears. Under 

Current 

Config

 the active SIM slot appears with the carrier setting you selected.

Activate the Phone

You use a SIM card to activate the phone on your CN80 WWAN model computer 
(CN80L1N). You can purchase the micro SIM card from your network provider. 
Dolphin CN80 WWAN models includes two SIM card slots (SIM 1 and 
SIM 2) for multiple network provider flexibility.

1. Select a network carrier. To learn how, see 

Add or Switch Between Network 

Carriers

 on page 58.

2. Activate and configure the SIM slot you are installing the card in, see 

Select a 

SIM Card Slot

.

3. Press and hold the 

Power

 button until the options menu appears.

4. Tap 

Power Off 

and then 

OK

 to verify.

5. Release one end of the hand strap.

6. Slide the battery latch to the right.

Warning:  If you have a CN80 NI/CN80G model certified for use in 

hazardous locations, read 

Important Information

, page  8.

Summary of Contents for Dolphin CN80G

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands