manualshive.com logo in svg

Honeywell Dolphin CN80G, User Manual

Share
Download
Honeywell Dolphin CN80G User Manual Download Page 38

28

Dolphin CN80 Mobile Computer

Insert a microSD Card

You can use a microSD card to increase file storage capacity or to install software. 
Honeywell recommends the use of Single Level Cell (SLC) industrial grade 
microSD or microSDHC memory cards with the computer for maximum 
performance and durability.

Note:

Format the memory card before initial use.

1. Save your files and close any open applications.

2. Press and hold the 

Power

 button until the options menu appears.

3. Tap 

Power Off

.

4. Release one end of the hand strap.

5. Slide the battery latch to the right.

Update

Tap to apply changes made to settings.

Default

Tap to set the Heater settings back to their default values.

Heater Setting

Description

Caution:  Always power off the computer before attempting to install or 

remove a card.

Warning:  If you have a CN80 NI/CN80G model certified for use in 

hazardous locations, read 

About the optional Dust Cover

, page 

7.

Summary of Contents for Dolphin CN80G

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands