background image

12 - 1 

12

Dolphin 9700 HomeBase Device

Overview

As the hub of your Dolphin system, the Dolphin 9700 HomeBase charging and communication cradle 
supports both RS232 and USB communications, which make it able to interface with the majority of 

 

PC-based enterprise systems. 

Charge Time

The base completes a full charge of the main battery pack installed in the terminal seated in the terminal 
well in 4 hours. The base completes a full charge of the main battery pack in the 

Auxiliary Battery Well

 

(see page 12-2) in 4 hours. 

Charging Process

The base also provides power to the intelligent battery charging system in all Dolphin terminals that 
senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge. 

Communications

Reliable data communications at speeds of up to 115k baud can be transmitted by the base through the 
RS232 serial port. Using the full-speed USB port, the data transmission rate goes up to 12 Mbps. 

These bases cannot be physically connected to each other - sometimes referred to as “daisy-chained”.

Convenient Storage 

The intelligent battery charging system makes this base a safe and convenient storage receptacle for your 
Dolphin terminal. 

Capacity

The base holds one terminal and features an auxiliary battery well behind the terminal well that can 
charge a battery pack independently of the terminal well. This means that one base can charge two 
battery packs: the one installed in the terminal and a spare. 

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in 
damage not covered by the warranty.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell 
peripherals, cables, or power adapters may cause damage not covered by the warranty.

!

!

Summary of Contents for Dolphin 9700















































































































































Reviews: