manualshive.com logo in svg

Honeywell Dolphin 9700, User Manual

Share
Download
Honeywell Dolphin 9700 User Manual Download Page 108

12 - 2

Parts and Functions

Front Panel 

Terminal Well 

Place the terminal in this well to communicate with a host device, power the terminal, and 
charge the installed battery pack. The base completely charges the main battery in a Dolphin 
terminal in 4 hours. If the host device is a workstation that uses ActiveSync, synchronization 
begins immediately. 

Auxiliary Battery Well

See 

Auxiliary Battery Well

 on page 

12-3.

DOCK LED

Turns solid green when the terminal is properly seated in the base.

AUX Battery LED

Indicates status of the battery charging in the auxiliary battery well; see 

Back Panel

 on page 

12-3.

   

For information about charging a battery in the auxiliary battery well, see page 12-5.

This color

means…

Orange 

The auxiliary battery is charging. 

Green 

The auxiliary battery has completed charging and is ready for use.

Terminal Well

DOCK LED

Auxiliary Battery Well

AUX 
Battery 
LED

COMM LED

Summary of Contents for Dolphin 9700















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands