Honeywell Dolphin 9700 User Manual Download

Page: 102 / 142

10 - 6

Connecting to Bluetooth Printers

Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices.

Look up the Bluetooth printer’s broadcasted ID.

Perform a device discovery (Tap

Settings

Bluetooth

Add new device

Look for the Bluetooth printer’s broadcasted ID in the list of discovered devices.

Click on the Bluetooth printer’s ID and wait for the prompt to enter a

Passcode

Enter the

Passcode

and tap

Next

The passcode may default to either "1111" or "0000." If there is no default, consult the printer
literature for the number.

Select a printing-related service in the list of services.

Tap

Save

to establish the connection on the terminal.

Complete any additional steps required by the printer.

Connecting to Bluetooth Headsets

Make sure the Bluetooth headset is in range and set to be discoverable by other Bluetooth devices.

Look up the headset’s broadcasted ID.

Perform a device discovery (Tap

Settings

Bluetooth

Add new device

Look for the headset’s broadcasted ID in the list of discovered devices.

Click on the headset’s ID and wait for prompt to enter a passcode.

Enter the

Passcode

and tap

Next

The passcode may default to either "1111" or "0000." If there is no default, consult the headset
literature for the number.

Select

Headset

in the list of services.

Tap

Save

to establish the connection on the terminal.

Complete any additional steps required by the headset.

Summary of Contents for Dolphin 9700















































































































































Search results

Summary of Contents for Dolphin 9700

Reviews:

Related manuals for Dolphin 9700

Brands by name

Popular brands

Honeywell Dolphin 9700, User Manual

Search results

Summary of Contents for Dolphin 9700

Reviews:

Related manuals for Dolphin 9700

Brands by name

Popular brands