Honeywell Dolphin 75e, User Manual

Page: 77 / 124

6 - 5
• User name + password
Select and enter your User name and Password in the boxes provided.
• Certificate
Select to have the terminal automatically search for certificates on the terminal. Touch the security certificate you want
to use to connect to the VPN.
• User name + pa preshared key
Select and enter your User name , Password and Preshared Key in the boxes provided.
• Preshared key
Select and enter your Preshared Key in the box provided.
• Preshared key+ certificate
Select to have the terminal automatically search for certificates on the terminal. Touch the security certificate you want
to use to connect to the VPN and then enter the
Preshared Key in the box provided.
7. If you are using a certificate to connect, you can turn On Server certificate validation for added security. When
turned On , the authenticity of the server is validated by comparing the server certificate to the terminal certificate.
8. Select whether you want the terminal to Connect automatically to the VPN. By default automatic connection is turned
On . If this option is turned Off , you have to manually select the VPN each time you want to connect.
9. By default Send all traffic is turned On . All data you send and receive goes over the VPN when the connection
active. You can limit traffic over the VPN to only data sent and received from protected domains or IP addresses.
To specify data traffic restrictions over the VPN:
• Turn Off Send all traffic .
• Touch domains or IP ranges, and then select add .
• Enter the protected domain name or IP range or addresses, and then select add .
• Press the Back button.
10. In the Profile name box, add the VPN profile name you want your settings saved under.
11. If needed, touch Advanced , to modify the following settings:
• Enter specific Proxy settings or add a DNS suffix .
• Turn VPN use on company Wi-Fi On or Off .
• Turn VPN use on home Wi-Fi On or Off .
12. When you are done modifying the Advanced settings, press the Back button.
13. Select save .
Connecting to a VPN
The type of VPN profile determines what you need to do to connect to the VPN. Profiles that have been set to connect
automatically do not require you to manually connect each time you want to access the VPN.
1. In the Apps list , touch Settings > VPN .
2. Verify the VPN Status is On .
3. The connection type is listed under the profile name (e.g., Automatic, Manual). Depending on the connection type, do
one of the following to connect:
• Automatic
The terminal automatically connects to the VPN when you access the organization’s network or Internet sites that
have and IP address in the protected IP range.