background image

2 - 14

Excessive discharge can degrade battery performance. Recharge the battery when your terminal indicates low battery 
power. 

Although your battery can be recharged many times, the battery life is limited. Replace it after the battery is unable to 
hold an adequate charge.

System Resets

See 

Resetting the Terminal

 on page 

1-13

.

Hardware Maintenance

When needed, clean the image engine window and the touch screen with a clean, non-abrasive, lint-free cloth. The terminal can 
be cleaned with a damp cloth.

Important:

All battery and connector doors must be present, undamaged, and properly closed to maintain the environmental 
rating of the terminal.

Installing a Memory Card 

You can expand the terminal’s memory capacity by installing a microSD or microSDHC card. Honeywell recommends the use of 
Single Level Cell (SLC) industrial grade microSD or microSDHC memory cards with Dolphin terminals for maximum 
performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card 
options.

Note: Format memory card before initial use.

Installation and/or Replacement

To install a memory card:

1.

Power Off 

the terminal.

2. Unlock and remove the battery door.

3. Pull the battery latch back and remove the battery.

Battery Door Lock

Battery Latch

Summary of Contents for Dolphin 75e





























































































































Reviews: