manualshive.com logo in svg

Honeywell CT45 Series, User Manual

Share
Download
Honeywell CT45 Series User Manual Download Page 103

CT45/CT45 XP Mobile Computer Series User Guide

93

Optional microSD Card Method

The mobile computer comes equipped with a microSD card socket. You can install 
an upgrade from a microSD card you insert in the computer.

Important:

The CT45/CT45 XP must have power for the entire length of the install process or it 
could become unstable. Do not attempt to remove the battery during the process.

1. On the CT45/CT45 XP, swipe up from the bottom of the Home screen to access 

all apps.

2. Tap 

Settings

  

>

Honeywell Settings 

> 

Provisioning mode

.

3. Tap the toggle button to turn Provisioning mode 

On

.

4. Tap 

AutoInstall

 

Settings

 . 

Verify 

Autoinstall

 is enabled 

.

5. Press and hold the 

Power

 button. 

6. Tap 

Power off 

or 

Power

 > 

Power off

,

 

depending your computer model.

7. On your workstation (e.g., laptop, desktop computer), format the microSD card 

and create a

 \honeywell\autoinstall 

folder on the root of the card. 

8. Save the upgrade file in the 

autoinstall

 folder.

9. Install the microSD card in the CT45/CT45 XP, and then press the 

Power

 

button. 

The computer automatically runs the upgrade found in the autoinstall folder on 
the card. The system update screen appears during the upgrade process. When 
the upgrade is finished, the lock screen appears.

10. Once installation is complete, turn Provisioning mode 

Off

.

About the Honeywell Upgrader

Use the Honeywell Upgrader app (HUpgrader) to check for and install OTA 
updates, and view the current OTA version installed on the computer. 

Install OTA Updates

To use the HUpgrader to install an OTA update file downloaded from the 

Technical 

Support Downloads Portal:

1. Save the OTA file (*.zip) the following folder on the CT45/CT45 XP computer:

•

Internal shared storage\Download

Summary of Contents for CT45 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands