Honeywell BW RigRat, User Manual

Page: 45 / 107

Setting Wi-Fi Communication Parameters in Device Configurator App
Wi-Fi-equipped instruments’ parameters for communication must be set in Device
Configurator app.
Wi-Fi
You can enable or disable Wi-Fi.
Mac Address
Select “Use Static IP Address” if you have a static IP or “Use DHCP” if your system allows
dynamic hosting configuration. Check with your system administrator to determine which is
appropriate for your network.
If you use a static IP address, you must provide the Static IP address, Gateway, and Subnet
Mask. If you are using DHCP, you do not have to provide these, because they will be filled in
automatically.
Channels and Security
Check with your system administrator for the settings in this section.
Security Mode
Different types of wireless security guard your network against possible instances of
unauthorized access. Using security, you can:
l
Ensure that no one can easily connect to your wireless network without permission
l
Personalize access regarding who can configure your wireless settings
l
Protect all data that is transmitted through the wireless network
Check with your system administrator for the wireless security mode you should use.
Use the drop-down menu to select the type of security.
Then set your Security Key.
Warning! Using a network with security disabled is not recommended.
BW RigRat 44 User Manual