Honeywell BacNet protocol, Installation And User Manual

Page: 18 / 42

Programming
Honeywell
• 16
5. Programming
Basic information on how to use the control keypad you will find in the Application Manual.
The navigation path to the fieldbus parameters may differ from application to application. The
exemplary paths below apply to the Honeywell SmartDrive.
1. First ensure that the right fieldbus protocol is selected.
2. Select
‘Fieldbus control’
as the
Remote Control Place
.
3. Choose source of reference.
4. Set fieldbus parameters (M5.7 and M5.8). See below.
5.1 BACnet MS/TP parameters and monitoring values (M5.7.3)
Code Parameter Min Max Unit Default ID Description
PARAMETERS
P5.7.3.1.1 Baud rate 1 4 bd 1
Communication speed
1 = 9600
2 = 19200
3 = 38400
4 = 76800
P5.7.3.1.2 Autobauding 0 1 1
Automatic baudrate
detection
0 = Off
1 = On; The automati-
cally detected baud rate
is then shown as value
of parameter P5.7.3.1.1
P5.7.3.1.3 MAC address 1 127 1
P5.7.3.1.4 Instance number 0 65535 0
Device Object's instance
number.
0 = Automatically
gegerated
P5.7.3.1.5
Communication
time-out
0 65535 s 10 0 = Not used
Navigate: Main Menu > I/O and Hardware (M5) > RS-485 (M5.7) OR Ethernet
(M5.8) > Common settings (M5.7.1) > Protocol (P5.7.1.1) > Edit >
(Choose protocol)
Navigate: Main Menu > Quick Setup (M1) > Rem. Ctrl. Place (P1.15)
OR
Navigate: Main Menu > Parameters (M3) > Start/Stop Setup (M3.2) > Rem.
Ctrl. Place (P3.2.1)
Navigate: Main Menu > Parameters (M3) > References (M3.3)