Page 5-5
28 Feb 2018
23-15-45
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Aspire-200
© Honeywell International Inc. Do not copy without express permission of Honeywell.
4. To navigate the list of parameters, press CTRL + N.
5. To configure the APN, press the number next to the
Data I/O APN
parameter,
and then press ENTER.
The Data I/O APN prompt appears.
6. Type the new APN, and then press ENTER.
7. Restart the HDU.
You can restart the HDU using menu 2, option Z.
E. Configuring NAV
The Aspire-200 uses information from the aircraft’s navigation system to steer the
antenna. To operate the system, you must configure the type of navigational
information available to the HDU and the transmission speed of NAV buses..
To configure the NAV:
1. Connect to the HDU maintenance port—see “Connecting to the Aspire-200
2. In the maintenance menus, to navigate to
menu 3
, press CTRL + N.
3. In
menu 3
, to access miscellaneous EEPROM parameters, press
m
.
The list of miscellaneous EEPROM parameters appears.
4. To navigate the list of parameters, press CTRL + N.
5. To configure the NAV1 type, press the number next to the
NAV1 Type
parameter, and then press ENTER.
The NAV1 Type prompt appears.
DATA I/O APN ?[ ] = ?
MISCELLANEOUS PARAMETERS
88 CHANNEL CARD CONFIGURATION 99 VSWR ERROR THRESHOLD
89 DATA I/O ETHERNET DUPLEX MODE 100 NAV1 TYPE
90 DATA I/O APN 101 NAV2 TYPE
91 MIN SAT LOOK ANGLE 104 MAXIMUM IGA POWER
92 PREEMPTABLE CALLS 105 MAX ORDER FOR INTERMOD CHECK
93 BGAN/SWIFT64 HYSTERESIS TIMEOUT 106 ENABLE PAP
94 ANTENNA MOUNTING ANGLE (ROLL) 107 PAP USER NAME
95 ANTENNA MOUNTING ANGLE (PITCH) 108 PAP PASSWORD
96 ANTENNA MOUNTING ANGLE (ROTATION) 109 LNA TO SDU RX THRESHOLD
97 RT-CHANNEL RESERVED POWER
WHICH PARAMETER # <CTRL> N for next page ?
NAV1 TYPE INERTIAL 0=INERTIAL 1=GNSS 2=HYBRID 7=AHRS 8=FMS = ?
