Page 4-2
28 Feb 2018
23-15-45
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Aspire-200
© Honeywell International Inc. Do not copy without express permission of Honeywell.
3. Mechanical Installation
This section includes information about installing the equipment in the core Aspire-200. Contact Honeywell
about installation kits that include mating connectors and cables.
A. HDU
Install the HDU in a standard 2-MCU rack. The Aspire-200 ships only the equipment
in the core system. The customer is responsible for the mounting tray, mating
ARINC 600 connector and cables.
Carlisle Interconnect Technologies supplies 2-MCU ARINC 600 shipping kits in
various configurations, provided in Table 4-1. You can contact Carlisle at
www.carlisleit.com.
The HDU rear connector is RADIALL NSXF1R101Y0012. The mating connector is
supplied by the customer.
B. IPLD
You can install the IPLD in one of two orientations described in Figure 3-3 on page
3-5.
Table 4-1 Carlisle Kits
Carlisle Part
Description
120-29256-101
Aspire-200 Install Kit (AMT-700)
120-29256-102
Aspire-200 Install Kit (AMT-1800/3500/3800)
120-29256-103
Aspire-200 Install Kit (LGA)
120-232154-101
Aspire-200 Install Kit (AMT-700) tray with isolators
120-232154-102
Aspire-200 Install Kit (AMT-1800/3500/3800) tray with isolators
120-232154-103
Aspire-200 Install Kit (LGA) tray with isolators
120-29255-101
Female DB26 kit for Aspire-200 SCM
120-21002-102 CCU-200
connector
kit
120-21002-104 CCU-200
wire
kit
6092-101
2 MCU S/S W/ BOTTOM AC FAN
200-91002-101
2 MCU S/L W/REAR AC FAN
6092-102
2 MCU S/S W/BOTTOM DC FAN
200-92144-101
2 MCU S/L W/REAR DC FAN
6054-101
2 MCU S/S NO FAN
6051-101
2 MCU S/L NO FAN
