![Honeywell ARENA User Manual Download Page 53](http://html.mh-extra.com/html/honeywell/arena/arena_user-manual_153519053.webp)
USER GUIDE
ARENA/ RANGER
53
EN2Z-0906GE51
R0708
In the iLON 10 configuration (section "PPP"), this setting will be stored as
"Modem Init String". The default is
E0Q0V1S0=0&C1M1&W.
This setting works
for the supported modems.
Wait for dial tone before calling
If enabled, the modem connected to the iLON 10 will wait for the dial tone.
Default = yes. If no connection can be established, the telephone installation
might not provide a correct dial tone. In this case, disable the option.
This information is appended to the Init string in the iLON 10: Do not wait for
dial tone: X0 Do wait for dial tone: <nothing>.
13. Under
iLon 10 Settings,
you can configure the iLon 10 by doing one of the
following:
a. Check
Same as for outgoing connection
if user name and password are
the same as under outgoing connections.
b. Uncheck
Same as for outgoing connection
if you want to configure the
iLON 10 using another user name and password.
– In
User Name
, enter the user name
which the iLON 10 uses to allow
HTTP access. This information is needed to allow ARENA making
configuration changes to the iLON 10. In the iLON 10 configuration
(section "Security"), this setting will be stored as user name for HTTP
access.
– In
Password,
enter the password which the iLON 10 uses to allow HTTP
access. This information is needed to allow ARENA making configuration
changes to the iLON 10. In the iLON 10 configuration (section
"Security"), this setting will be stored as password for HTTP access.
c. To set the iLON 10 to factory default, click
Factory default
icon
.
To configure the iLON 10, click
Advanced
icon
which shows the
iLON
10 configuration pages.
NOTE:
Do not change configuration settings here, unless absolutely necessary.
Refer to the "Cross Reference of iLON 10 Settings and ARENA Settings"
section. The settings have to match, otherwise, the supervisor ARENA
cannot contact the iLON 10.
14. Click
OK
button. The iLON 10 configuration data are sent to the iLON 10. Note
that only if the iLON 10 has been reached and configured successfully, ARENA
saves the site configuration.
Summary of Contents for ARENA
