Honeywell ARENA User Manual Download Page 39

Page: 39 / 160

USER GUIDE

ARENA/ RANGER

EN2Z-0906GE51

R0708

– Settings such as graphic, alias, etc. done in the supervisor ARENA apply

only to the supervisor ARENA itself and are independent of settings done
in a local ARENA

– Online value changes through Remote control: last wins
– Trending

•

Supervisor ARENA

ARENA (remote iLON 10 via Modem)

LON Bus

SERVAL

PANTHER / TIGER

iLON 10

Supervisor

ARENA

Modem

Remote

ARENA

Fig. 8. Site Combination ARENA

ARENA (remote iLON 10 via Modem)

– Example for a supervisor ARENA which centrally connects data of one or

multiple remote ARENAs

– Remote

maintenance

– Connection via modem oder LAN
– Alarming
– Settings such as graphic, alias, etc. done in the supervisor ARENA apply

only to the supervisor ARENA itself and are independent of settings done
in a local ARENA

– Online value changes through Remote control: last wins
– Trending

•

Supervisor ARENA

ARENA (remote iLON 10 vial LAN)

LON Bus

SERVAL

PANTHER / TIGER

iLON 10

Supervisor

ARENA

Remote

ARENA

LAN

Fig. 9. Site Combination ARENA

ARENA (remote iLON 10 via LAN)

– Example for a supervisor ARENA which centrally connects data of one or

multiple remote ARENAs

– Remote

maintenance

– Connection via modem oder LAN
– Alarming
– Settings such as graphic, alias, etc. done in the supervisor ARENA apply

only to the supervisor ARENA itself and are independent of settings done
in a local ARENA

– Online value changes through Remote control: last wins
– Trending

Switching between Sites

You can switch between sites using the site tree presenting all configured sites.

You can switch to a remote site either with or without connecting to the site (Offline).

When connecting to a site without physically connecting to it, only historical trend

and alarm data will be available. This means that a supervisor ARENA will be able

to store alarms and trend from other sites. When switching to a local site, you will be

automatically connected.

System Limitation

One ARENA per local plus one iLON 10

At the same time, only one ARENA can access an iLON 10 (no parallel access

possible).

Remote Site with ARENA

ARENA, that is, an ARENA that resides on a remote site, allows incoming

connections either via modem dial-in or via any other TCP/IP connection supported

ARENA-ARENA connection via Modem not supported in ARENA 2.0

Summary of Contents for ARENA
































































































































































Search results

Summary of Contents for ARENA

Reviews:

Brands by name

Popular brands

Honeywell ARENA, User Manual

Search results

Summary of Contents for ARENA

Reviews:

Brands by name

Popular brands