Honeywell ARENA User Manual Download Page 21

Page: 21 / 160

USER GUIDE

ARENA/ RANGER

EN2Z-0906GE51

R0708

List Display Configuration

A list configuration, for example of a datapoints list, always applies to all lists of the

same kind (in this case all datapoints list) on the same level (site, device, plant,

segment). The appearance of a list, for example, a datapoints list, can be defined by

configuring the following:

•

Display columns

Defines, which columns are displayed and in which order the columns are
displayed

•

Sort order

Defines the default sort sequence (ascending or descending) within a column

•

Default

filter

Defines which filter is used by default for the list display

NOTE:

The filter definitions apply to all local users of the ARENA.

1. At the bottom of the list, click the

Configuration

button.

The

Variable List Configuration

dialog box displays.

2. To configure the columns displayed and their sort sequence, click the

Display

Columns

tab.

Under

Available columns,

all columns that can be displayed at maximum are

listed. Under

Displayed Columns

, all currently displayed columns are listed. The

column display will be configured by moving the columns between the

Available

Columns

and

Displayed Columns

tables using the angle brackets under

Available Columns

. The sort sequence of the displayed columns will be

configured by using the upward and downward buttons under

Displayed

Columns

3. To select the columns to be displayed and their sort sequence, move columns

between the tables and determine sort sequence by doing one of the following:
a. To move single column(s),

In the

Available Columns

list or in the

Displayed Columns

table, highlight the

columns to be moved. Multiselection by using the CTRL key is possible.

b. Click the single angle bracket button of the desired direction.

Or,

c. To move all column(s) in one step,

Click the double angle bracket button of the desired direction.

d. To set the sort sequence, that is, the position of the columns within the

displayed list, highlight the column in the

Displayed Columns

table.

Multiselection by using the CTRL key is possible.

Summary of Contents for ARENA
































































































































































Search results

Summary of Contents for ARENA

Reviews:

Related manuals for ARENA

Brands by name

Popular brands

Honeywell ARENA, User Manual

Search results

Summary of Contents for ARENA

Reviews:

Related manuals for ARENA

Brands by name

Popular brands