B.
Hardware
Part
Numbers
(1) At the time of writing of this document, the SATCOM Products were identifie
d b
y the hardware
part numbers indicated in Table 1.
Table 1. Small SATCOM Kit Part Numbers
SATCOM PRODUCT
HARDWARE PART NUMBER
Indoor Unit
90600511
Low Gain Antenna
89000015-009
Harness Assembly
90600551
Coaxial Cable Assembly
90600596
SIM Card SBB
90100090
(2) Where:
– A change to form fi
t o
r function will be reflecte
d i
n a new base part number.
(3) The terminal is designed but not certifie
d t
o DO-254 design assurance level (DAL) E
– Hardware functions whose failure or anomalous behavior, as shown by the hardware safety
assessment, would cause a failure of system function with no effect on UAV operational
capability or UAV fligh
t o
perator workload. No guidance from DO-254 applies.
2.
Indoor
Unit
A.
Indoor
Unit
Description
(1) The Indoor unit contains the modem, digital and RF circuitry.
(2) The Indoor unit requires a combined power input and Ethernet cable which will be provided.
The DC power input powers the whole system.
(3) The satellite data transfer, command, monitoring and debug are via Ethernet.
(4) A SIM card must be inserted into the indoor unit for it to operate.
(5) Table 2 provides the specification
s
or the Small SATCOM’s Indoor Unit.
Page 3
1
8
Feb 2021
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
SMALL SATCOM
