Dolphin® 7600 Mobile Computer
User’s Guide
Rev A
5/23/2008
7 - 9
Network Cards
The Network Cards setting displays the network cards installed in the terminal.
1.
Tap Start > Settings > Connections > Network Cards.
2.
Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.)
3.
If you make a change on one of these tabs, tap OK to confirm the changes.
4.
You must perform a soft reset to update the registry entries; see
Soft Reset (Warm Boot)
on page
3-
15.
During the soft reset, the new registry entries are created and can be read by the applications
that need them.
Do NOT perform a
Hard Reset (Cold Boot)
(see page 3-15) after modifying an adapter here. Hard resets return
the terminal to factory defaults, which erases network adapter modifications made here.
!
Downloaded from
www.Manualslib.com
manuals search engine
