Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual Download Page 122

Page: 122 / 142

11 - 2

Rev A

5/23/2008

Dolphin® 7600 Mobile Computer

User’s Guide

Back Panel

Power Supply Connector

Use this connector to attach the power supply to the QuadCharger device. The universal
power supply accepts input voltages between 90-265 volts.

Power Switch

Toggle the power switch to turn the QuadCharger device on and off.

Supplying Power to the QuadCharger Device

Use the power adapter cable that comes with the QuadCharger device so that the input voltage is
adjusted appropriately.

Locate the AC power adapter cable and plug it into the power source.

Connect the power cable to the power adapter.

Connect the power cable to the power supply connector on the back of the QuadCharger device.

Press the power switch to the ON position.

The device performs the following power-up diagnostic routine for each slot indicated by the Status
LEDs:

•

All ON Orange

•

delay (500ms)

•

All ON Red

•

delay (500ms)

•

All ON Green

•

delay (500ms)

•

All OFF

Power Supply Connector

Power Switch

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for 7600BG-122-B4EE - Hand Held Products Dolphin 7600















































































































































Search results

Summary of Contents for 7600BG-122-B4EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BG-122-B4EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands

Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600, User Manual

Search results

Summary of Contents for 7600BG-122-B4EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BG-122-B4EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands