Dolphin® 7600 Mobile Computer
User’s Guide
Rev A
5/23/2008
10 - 5
Charging the Main Battery
The HomeBase powers the terminal and fully charges its main battery
pack in less than four hours.
As battery packs charge, the charging circuitry follows the two-step
charging process (CC-CV) that is recommended for Li-Ion batteries.
The process monitors changes in temperature, current, and voltage.
Inserting a Terminal
1.
Install the battery pack in the terminal; see
Install the Main Battery
on page
2-1.
2.
Power the Dolphin HomeBase device; see
Powering the
HomeBase Device
on page
10-4.
3.
Slide the terminal into the terminal well until the Dock LED lights
green to indicate that the terminal is properly seated.
4.
The battery pack begins charging.
Checking Battery Power
To check battery power while the terminal is operating,
tap Start > Settings > System tab > Power .
Downloaded from
www.Manualslib.com
manuals search engine
