Honeywell 60 Series, Configuration Manual

Page: 56 / 93

Honeywell 60 Series IP Camera Software Configuration Guide
42
Figure 5-11 SNMP Configurations
Enable SNMPv1, SNMPv2c
: Check to enable SNMPv1, SNMPv2c.
Enter the names of Read/Write community and Read Only community according to your NMS
settings.
Enable SNMPv3
: Check to enable SNMPv3 which contains cryptographic security, a higher
security level.
•
Security name: Choose Read/Write or Read Only and enter the community name
according to your NMS settings.
•
Authentication type: Select MD5 or SHA as the authentication method.
•
Authentication password: Enter the password for authentication (at least 8 characters).
•
Encryption password: Enter a password for encryption (at least 8 characters).