Honeywell 2MLL-PMEA User Manual Download Page 68

Page: 68 / 185

Chapter 7 N Configurator Setting

Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User

’s Guide R240

Honeywell

January 2019

7.2 Installation

7.2.1 System requirements



Pentium or later



More than 256 Mbytes of RAM



Windows XP/VISTA/7/8.x/10, 32/64 bit



More than 500 Mbytes of hard disk



Resolution: 1024 x 768 pixel or more
1280 x 1024 pixel recommended

7.2.2 How to install Program

Please see the software manual of N Configurator for more details. We will discuss the
composition after the installation of the software.

(1) Directory after installation

After the installation, generally, located folder

“\SoftMaster\nCongirurator” directory is

composed as follows.

[Figure 7.2.1] The structure of installation directory

- N Configurator: Root directory of configuration tool for PROFIBUS DP Master
- bmp:

Bitmap depository used by the GSD file

- bnr:

Network Configuration binary image file depository

- gsd:

GSD file depository provided by the manufacturer of PROFIBUS DP module

- prj:

Network Configuration Project depository

- sys:

Application setting directory used by the tool

(2) Caution after installation

After the installation is completed, users should be aware of following things. The default

GSD files provided are our company

’s smart I/O and inverter, so other companies’

products or new products are not updated. Therefore, if there is a new GSD file, then copy

it to the GSD directory to use, and copy bitmap image files used by the GSD to the bmp

directory. Start again the N Configurator program to apply the copied GSD.

Summary of Contents for 2MLL-PMEA


























































































































































































Search results

Summary of Contents for 2MLL-PMEA

Reviews:

Honeywell 2MLL-PMEA, User Manual, Page: 68 / 185

Search results

Summary of Contents for 2MLL-PMEA

Reviews: