Honeywell 2MLF-RD4A, User Manual

Page: 115 / 142

6. Programming
6.1. Read/write operation of operation parameters setting area
R200 Resistance Temperature Detector 2MLF-RD4A User's Guide 115
September 2010 Honeywell
Example :
If RTD module is installed on Base No.0 and Slot No.6, and CPU module’s data at
D10–D13 is written on internal memory addresses 14–17 for RTD input module
while M00000 bit is turned ON.
(Address) D area of CPU module Internal memory
(Address)
D10 CH0 average value setting CH0 average value setting 14
D11 CH1 average value setting CH1 average value setting 15
D12 CH2 average value setting CH2 average value setting 16
D13 CH3 average value setting CH3 average value setting 17
- -
Figure 70 – Example of write execution