Mounting and Connection Instructions Reader series "luminAXS"
24
Safety notes
Read the instructions carefully and thoroughly before installing the device and putting it into
operation. They contain important information on assembly, programming and operation.
The device is a state-of-the-art product. Only use the device:
- In accordance with regulations and
- When it is in a technically correct state
- In accordance with technical data.
The manufacturer is not responsible for damage that is caused by use not in accordance with regulations.
Installation, programming as well as maintenance and repair work may only be carried out by
authorized, skilled personnel. Soldering and connection work should only be carried out inside the
entire system when it is deenergized. Soldering work should only be carried out using a temperature-
controlled soldering bit that is galvanically separated from the power supply. Observe the
safety
VDE
instructions as well as the regulations of the local power supply company.
Do not use the reader in a potentially explosive environment or in rooms with metal or
plastic decomposing vapours.
Table of Contents
Page
1
General ......................................................................................................................................24
.
1.1 Application and Reader versions .......................................................................................25
1.2 Performance features ........................................................................................................26
1.3. Interfaces ...........................................................................................................................26
1.4 System conditions..............................................................................................................26
2
ctional description.............................................................................................................27
.
Fun
3.
Operating and indication elements ........................................................................................28
4
Configuration............................................................................................................................30
.
4.1 Standard programming in state of delivery ........................................................................30
4.2 User parameterisation with the configuration tool usb .......................................................30
4.2.1 Usage of the Configuration tool................................................................................30
4.2.2 Parameterisation overview.......................................................................................31
4.2.3 Change interface from RS-485 to Clock/Data with MIFARE readers.......................31
4.2.4 Buzzer actuation with Clock/Data readers ...............................................................31
4.3 Hardware-based LED control with Clock/Data readers......................................................31
5.
Mounting ...................................................................................................................................32
6
Connection diagram ................................................................................................................34
.
7.
Start-up .....................................................................................................................................37
7.1 RS-485 address allocation.................................................................................................37
7.1.1 Overview of the different options for address allocation .........................................38
7.1.2 Activate adress allocation mode .............................................................................38
7.1.3 A dress
d
indicator ....................................................................................................38
7.1.
dress
4 Manual ad
allocation via central control unit ..................................................39
7.1.
dress
5 Automatic ad
allocation with data carrier .......................................................39
7.1.6 Manual ad
allocation via IQ DeviceInstaller ...................................................39
dress
7.1.7 Manual address allocation via reader keypad, stand alone operating mode ..........40
7.1.8 Clear address(es) ...................................................................................................40
7.2 Automatic adjustment of transmission range .....................................................................40
7.3 Keypad lighting ..................................................................................................................40
7.4 Lighting ring .......................................................................................................................40
8
Accessories ..............................................................................................................................41
.
9.
Approvals/Certifications..........................................................................................................41
10.
cal data...........................................................................................................................42
Techni
10.1 proX readers ......................................................................................................................42
10.2 MIFARE DESFire EV1/EV2 readers ..................................................................................42
10.3 General data ......................................................................................................................43
11. Cleaning and care ....................................................................................................................43