background image

12

Mounting and Connection Instructions Viewguard PIR RF

13. Technical data

14. Warnings about lithium batteries

Operating voltage U_b

Item no. 015605

Battery lifetime

typ. 2,5 years*

Current consumption:

typ. 65 µA

Frequency band

433 / 868 MHz

Transmitting range

typ. 300 m

Range (programmable)

Area optics

8 / 11 / 13 / 15 m

Long range optics (Item no. 033435)

29 / 35 / 42 / 50 m

Curtain optics (Item no. 033434)

17 / 21 / 25 / 30 m

PIR sensor
PIR sensivity (programmable)

normal / high

Installation position

vertical, optics at bottom

Protection class as per EN 60529

IP 30

Environmental class as per VdS

II

Operating temperature range

-10 °C bis +55 °C

Storage temperatur range
- without battery pack

-25 °C up to +70 °C

- with battery pack

25 °C +/- 10 °C

Dimensions W x H x D

64 x 158 x 48 mm

Colour

traffic

*Battery lifetime depends on actuations per day:

typ. 2.5 years at 8 hours actuation per day
typ. 3.0 years at 1 hour actuation per day
typ. 2.0 years at 24 hours actuation per day.

The detector Viewguard PIR RF, Item no. 015610.01

when used as intended, comply with the basic require-
ments of article 3 of the R&TTE Guideline 1999/5/EG.

The EU conformity declaration can be downloaded at

"www.honeywell.com/security/de" under Service- /
Download.

The device contains a lithium battery. To avoid the risk of fire or burns,
the battery must not be damaged, short-circuited or reloaded. Do not
contact it with fire or water. There is a risk of explosion if the battery is
changed improperly. Replace the battery only by the same or an
equivalent type recommended by the manufacturer. D i s p o s e u s e d
batteries according to EU guideline 2006/66/EG (see following text).
A battery change must only be carried out by qualified personell
introduced to the VDE regulations.

1 Batteriepack 7,2 V/2,6 Ah

by free visibility

temperature-compensated

white (similar to RAL 9016)

15. Accessories

15.1 Mounting accessories

033390.17 Adjustable joint

033588.17 Ball-and socket set for wall and corner mounting

033391.17 Seal

Swivel range: Horizontal

ve4° up to -8°

not as per VdS and EN

Swivel range: Horizontal

vertical

(PU = 20 piece)

±20°,

±45°,

±20°

not as per VdS and EN

15.2 Viewguard PIR mirror sets

Honeywell Security Group

Novar GmbH

Johannes-Mauthe-Straße 14

D-72458 Albstadt

www.honeywell.com/security/de

Notes on environment / disposal

Batteries and recharchable batteries - even free from heavy metal -
must not disposed of in domestic waste. According to EU guideline
2006/66/EG users are obligated to return batteries for recycling. In
Germany they will be accepted for free at each selling point;
alternatively they can be dispensed in public storage vessels for old
batteries or at public waste disposal authorities.

Outside of Germany please observe the local regulations on battery
disposal.

Commercial batteries may contain heavy metal labelled by:

Pb for lead
Cd for cadmium
Hg for mercury

Pb       Cd        Hg

P02647-10-002-03
2014-09-22
© 2014 Novar GmbH

033434

Viewguard PIR mirror, Curtain optics

(PU = 3 piece)

The curtain mirror is suitable for monitoring possible intrusion locations.

mirror distribution 11 zones on 11 levels
acceptance angle 7.5° hor., 85° vert.
range

17 / 21 / 25 / 30 m

Mounting height:

- Recommended:

2.50 m for optimal operating sensitivity.

- Permitted:

2.20 m to 3.00 m

033435

Viewguard PIR mirror, Long-range optics

(PU = 3 piece)

The long-range mirror is suitable for monitoring corridors.

mirror distribution 8 zones on 6 levels
acceptance angle 30° hor., 78° vert.
range

29 / 35 / 42 / 50 m

- Recommended:

2.50 m for optimal operating sensitivity.

- Permitted:

2.20 m to 3.00 m

Mounting height:

5m

10m

15m

20m

25m

30m

2.5m

Horizontal detection coverage

Vertical detection coverage, mounting height 2.50 m

Horizontal detection coverage

10m

20m

30m

0

5m

15m

25m

0.5m
0.5m

0

1.5m

1.5m

10m

20m

30m

40m

50m

0

Vertical inclination 0°

Vertical detection coverage

10m

20m

30m

40m

50m

0

2.5m

Vertical inclination 0°

16. VdS approval

015610.01 Viewguard PIR RF

G108506, IDS Class B, with area mirror
G108507, IDS Class B, retrofitted with longe-range mirror
G108508, IDS Class B, retrofitted with curtain mirror

Summary of Contents for 015610.01













Reviews: