Honeywell Home TUXEDOW Installation And Setup Manual Download Page 8

Page: 8 / 56

TUXEDOW INSTALLATION AND SETUP GUIDE

Control Panel Compatibility

The table below lists compatible control panels and their software revision levels.

NOTE:

For SIA installations used with a VISTA-128BPTSIA Control, see the SIA CP-01 Quick Reference Chart by visiting:

www.resideo.com

NOTE:

Keypad may only be used in the following UL/cUL installations: UL 365, UL 609, UL 985, UL 1023, UL 1610,

CAN/ULC-S303, CAN/ULC-S304, ULC-S545, ULC/ORD-C1023, and ANSO/SIA CP-01-2010.

Compatibility Table

Panel Type

Panel Version

Max # of touchscreens

VISTA-15p

V3 and higher

VISTA-20p

V3 and higher

VISTA-21iP

All

VISTA-128BPT

All

VISTA-250BPT

All

VISTA-32FBPT

All

VISTA-128FBPT

All

VISTA-250FBPT

All

•

The keypad sound suppression feature is available in some commercial panels and is not

compatible with the TUXEDOW keypad.

•

The ‘Voice Chime’ feature is a VISTA-15P/20P/21iP control feature only (refer to the table

above).

NOTE:

If using the maximum number of keypads, an additional auxiliary power supply may be needed. Refer to the “

” section for more information.

Front Panel LED’s

Touch

to access the Introduction and Training Videos.

Summary of Contents for TUXEDOW

























































Search results

Summary of Contents for TUXEDOW

Reviews:

Related manuals for TUXEDOW

Brands by name

Popular brands

Honeywell Home TUXEDOW, Installation And Setup Manual

Search results

Summary of Contents for TUXEDOW

Reviews:

Related manuals for TUXEDOW

Brands by name

Popular brands