41
Z-Wave Notes:
1.
The TUXEDOW ignores Z-Wave Basic Command Class commands that are sent to it but it will send Basic Command
Class commands to some devices depending on their capabilities.
2. This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers.
All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of
the network.
3. The TUXEDOW supports a single Association Group (1 – also known as the lifeline) with a single NodeID.
4. The Device Specific Key (DSK) is located on the back of the unit at the bottom of the FCC Label.
5. Supported Command Classes:
Non-Secure Command Classes
Secured Command Classes
i.ZWAVEPLUS_INFO
ii.TRANSPORT_SERVICE
iii.CRC_16_ENCAP
iv.APPLICATION_STATUS
v.SECURITY_2
vi.SECURITY
vii.INCLUSION_CONTROLLER
viii.SUPERVISION
ix.MULTI_CMD
x.NETWORK_MANAGEMENT_INCLUSION
xi.NETWORK_MANAGEMENT_BASIC
xii.NETWORK_MANAGEMENT_PROXY
xiii.NETWORK_MANAGEMENT_INSTALLATION_MAINENANCE
xiv.ASSOCIATION_GRP_INFO
xv.DEVICE_RESET_LOCALLY
xvi.MANUFACTURER_SPECIFIC
xvii.POWERLEVEL
xviii.NODE_PROVISIONING
xix.FIRMWARE_UPDATE_MD
xx.ASSOCIATION
xxi.VERSION
Wireless Range
Things to consider regarding RF range:
-
Each wall or obstacle (such as refrigerator, big screen TV, etc.) between the remote and the destination device will
reduce the maximum range of 100 feet by approximately 25-30%.
NOTE:
if using Z-Wave Plus devices, the range in a non-obstructed setting is 547.9ft (167 meters).
-
Brick, tile or concrete walls block more of the RF signal than walls made of wooden studs and drywall.
Summary of Contents for TUXEDOW
Page 6: ...iv ...
Page 55: ...TUXEDOW INSTALLATION AND SETUP GUIDE 49 NOTES ...
