Honeywell Home TUXEDOW Installation And Setup Manual Download Page 52

Page: 52 / 56

TUXEDOW INSTALLATION AND SETUP GUIDE

Picture

TUXEDOW can display personal photo(s) on the Home screen as wallpaper or in a slide show format.

ICON

ACTION

NOTES

1. Insert a media card (Micro SD/SDHC) with stored (jpg,

.bmp, .png or .jpeg) photos.

2. Touch the

Multimedia

and

Picture

icons and then

select a

Picture

folder to view.

3. Select a photo and touch Play

to view pictures in a

slide show format.

4. To set a picture as wallpaper, select the

Default/Wallpaper

folder to activate

5. Touch

Back

to return to the previous screen.

The Picture feature allows you to set up and view up to

1000 stored photos or select a photo to set it as wallpaper

display.

Multi-Media functionality is supplementary only

and has not been evaluated by UL.

Video

Insert a media card (Micro SD/ SDHC) with stored (.avi, .ts, .mpg, .mp4, .mov, .mkv, or .flv) video files.

NOTE:

Micro SD card max size is 64GB and must be FAT32, SDXC format. Recommended is Kingston or Samsung.

ICON

ACTION

NOTES

1. Touch the

Multimedia

and

Video

icons; then select the

Video

folder to view.

2. Touch

Play

to start the selected video file.

3. Touch the

Multimedia

information

icon to view

picture/video information.

4. Touch

Back

to return to the previous screen.

Multimedia functionality is supplementary only and

has not been evaluated by UL.

Summary of Contents for TUXEDOW

























































Search results

Summary of Contents for TUXEDOW

Reviews:

Related manuals for TUXEDOW

Brands by name

Popular brands

Honeywell Home TUXEDOW, Installation And Setup Manual

Search results

Summary of Contents for TUXEDOW

Reviews:

Related manuals for TUXEDOW

Brands by name

Popular brands