© The Smart Thermostat Shop 2021
How It Works:
How do I bind the TRV to Evohome?
Press and hold the right button for 5 seconds
Until the right LED flashed orange
A permanent green LED will indicate a succesful binding
The binding mode will last for 2 minutes and if the
device is not able to bind the LED will stop flashing
How do you check the status of the valve?
Once you install your TRV short press right
button to check the status of the device
A green LED flash indicates that your device is working properly
A permanent orange LED indicates that the battery levels are low.
A permanent red LED indicates a mounting issue.
A red LED flash will indicate a signal issue:
signal lost or the device is not bound.
Evohome controller will reactively provide you with
the device’s status regardless pressing the button
