© 2012 American Honda Motor Co., Inc. – All Rights Reserved.
AII 47345 (1209)
9 of 12
32. Install the XM tuner bracket A to the XM tuner
with two 5 x 8 mm washer-screws.
NOTE: Make sure to install the bracket right side up
in the correct position.
33. Working through the glove box opening, loosen the
vehicle nut on the blower motor.
XM TUNER
BRACKET A
5 x 8 mm
WASHER-SCREWS
1-PIN
CONNECTOR
14-PIN
CONNECTOR
XM TUNER
862306BY
GLOVE BOX
OPENING
BLOWER
MOTOR
VEHICLE NUT
Loosen.
If the vehicle is equipped with HandsFreeLink (HFL),
continue with step 34; if not, go to step 36.
34. Remove the vehicle clip from the HFL unit bracket.
Using diagonal cutters, cut and remove the vehicle
clip.
35. Remove the vehicle bolt from the HFL unit bracket.
862307BY
GLOVE BOX
OPENING
VEHICLE CLIP
Cut off.
HFL UNIT
BRACKET
HFL UNIT
HARNESS
FRONT
VEHICLE BOLT
Reuse.
VEHICLE
CLIP
HFL UNIT
BRACKET
DIAGONAL
CUTTERS
