© 2012 American Honda Motor Co., Inc. – All Rights Reserved.
AII 47345 (1209)
7 of 12
18. Using scissors, cut one cushion tape into four equal
pieces.
19. Using isopropyl alcohol on a shop towel, thoroughly
clean the areas where the cushion tapes will attach.
20. Route the antenna cord along the vehicle harness.
Secure the antenna cord to the vehicle harness with
four pieces of cushion tape.
21. Using a piece of electrical tape, mark the antenna
cord where it touches the dashboard panel.
862018CY
CUSHION TAPE
Cut into four equal pieces.
ANTENNA
CORD
VEHICLE
HARNESS
INSTRUMENT PANEL
RIGHT
A-PILLAR
912601AB
ANTENNA
CORD
ELECTRICAL
TAPE
DASHBOARD PANEL
RIGHT
A-PILLAR
22. Using scissors, cut one EPT sealer in half. Wrap
these halves, plus the half remaining from step 13,
around the antenna cord. Start at the tape mark you
made in step 21 and work downward.
23. Route the antenna cord down to the glove box
opening. Loosely secure the excess antenna cord to
the vehicle harness with one wire tie.
862019BY
ANTENNA
CORD
3 EPT SEALERS
Including one
from step 13.
MARK
EPT SEALER
Cut in half.
RIGHT
A-PILLAR
ANTENNA
CORD
GLOVE BOX
OPENING
