10 of 12
AII 47345 (1209)
© 2012 American Honda Motor Co., Inc. – All Rights Reserved.
36. Attach the XM tuner bracket A under the blower
motor nut loosened in step 33, but don’t tighten the
nut yet.
37. Attach the wire tie with clip (installed in step 31) to
the XM tuner bracket.
38. Install the XM tuner bracket B to the XM tuner with
two 5 x 8 mm washer-screws and two plain washers.
862308BY
GLOVE BOX
OPENING
BLOWER
MOTOR
NUT
Loosely
secure.
BLOWER
MOTOR
XM TUNER
BRACKET A
FRONT
WIRE TIE
WITH CLIP
XM TUNER
BRACKET A
BUS CABLE
ANTENNA
CORD
ANTENNA
CORD AND
BUS CABLE
5 x 8 mm
WASHER-SCREWS
XM TUNER
GLOVE BOX
OPENING
XM TUNER
BRACKET B
If the vehicle is equipped with HFL, continue with step 39;
if not, go to step 42.
39. Secure the XM tuner to the vehicle bracket and the
HFL unit bracket with the vehicle bolt removed in
step 35.
40. Secure the HFL unit harness to the XM tuner bracket
B with one wire tie with clip.
41. Tighten the blower motor nut installed in step 36. Go
to step 44.
862311CY
BLOWER MOTOR NUT
Tighten.
FRONT
WIRE TIE
WITH CLIP
XM TUNER
BRACKET B
HFL UNIT
HARNESS
FRONT
VEHICLE BOLT
HFL UNIT
BRACKET
XM TUNER
BRACKET B
VEHICLE
BRACKET
VEHICLE
BOLT
GLOVE BOX
OPENING
