Maintenance Fundamentals
58
Mainten
a
nce
❙
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use a
dry cloth with chain cleaner designed
specifically for O-ring chains, or neutral
detergent. Use a soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant. If not available, use
SAE 80 or 90 gear oil.
Do not use a steam cleaner, a high pressure
cleaner, a wire brush, volatile solvent such as
petrol and benzene, abrasive cleaner, chain
cleaner or lubricant NOT designed specifically
for O-ring chains as these can damage the
rubber O-ring seals.
Avoid getting lubricant on the brakes or tyres.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the motorcycle.
Pro Honda HP is a pre-mixed solution of
antifreeze and distilled water.
Recommended lubricant:
Drive chain lubricant designed specifically
for O-ring chains.
If not available, use SAE 80 or 90 gear oil.
Recommended Coolant
Concentration:
50 % antifreeze and 50 % distilled water
14 VFR800F-32MJM6000.book 58 ページ ２０１４年４月４日 金曜日 午後６時３８分
Summary of Contents for VFR800FE 2014
Page 140: ...14 VFR800F 32MJM6000 book 137...
Page 141: ...14 VFR800F 32MJM6000 book 138...
