Tyre Puncture
u
Removing Wheels
104
Tr
ou
bles
hoo
ting
9.
Install the left brake caliper and tighten
new mounting bolts.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the brake caliper.
10.
Lower the front wheel on the ground.
11.
Apply the brake lever several times.
Then, pump the fork several times.
12.
Retighten the left axle pinch bolt.
13.
Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
14.
Install the wheel speed sensor and
tighten the bolts, then check the
clearance between the wheel speed
sensor and the pulser ring.
15.
Remove the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque:
45 N·m (4.6 kgf·m, 33 lbf·ft).
NOTICE
When installing the brake calipers into position on
the fork legs, carefully fit the brake disc between
the pads to avoid scratching them.
Torque:
22 N·m (2.2 kgf·m, 16 lbf·ft).
14 VFR800F-32MJM6000.book 104 ページ ２０１４年４月４日 金曜日 午後６時３８分
Summary of Contents for VFR800FE 2014
Page 140: ...14 VFR800F 32MJM6000 book 137...
Page 141: ...14 VFR800F 32MJM6000 book 138...
