Honda TRX420FA1, Owner'S Manual

Page: 227 / 272

Taking Care of the Unexpected
219
If the Transmission Is Not
Functioning Properly
If the ATV does not move, even through “–” is not blinking in the
gear position indicator:
If your ATV won’t move, it is possible the transmission is locked. Use
the following procedure to unlock the transmission.
1. Make sure the transmission is in neutral.
2. Apply the parking brake.
3. Turn the ignition switch to the OFF (
w
) position.
4. Loosen the screw (1) and release the lock plate (2).
5. Turn the emergency valve (3) by the screwdriver using the inside
of the front fender hole (4) all the way in. With the engine
running, your ATV will move forward slowly at idle.
6. See your dealer as soon as possible.
When the battery is low (or dead):
• See If the Battery Is Low (or Dead) , page 234.
LEFT SIDE
(1) screw
(4)
(2) lock plate
(3)
(2)
(1)
(4) inside of the front fender hole
(3) emergency valve
14 TRX420FA1 FA2-32HR3B000.book 219 ページ ２０１３年９月６日 金曜日 午後１時５７分