Servicing Your Honda
194
Battery
6. Remove the battery and taking care not to drop the terminal
nuts.
7. Charge the battery (see following section).
8. Store your battery in an easy-to-reach location off the floor, in an
area protected from freezing temperature and direct sunlight.
9. Clean the compartment after removing the battery for storage.
Dry the compartment.
10. Slow charge the battery (see following section) once every 30
days.
Installation
1. Check that the battery rubber (5) for damage. If necessary,
replace the battery rubber.
2. Make sure the battery rubber is properly installed.
3. Reinstall in the reverse order of removal.
Be sure to connect the positive (+) terminal first, then the
negative (–) terminal.
4. Make sure all bolts and other fasteners are secure.
5. Install the removed parts in reverse order of removal.
(5) battery rubber
(5)
14 TRX420FA1 FA2-32HR3B000.book 194 ページ 2013年9月6日 金曜日 午後1時57分
Summary of Contents for TRX420FA1
