2006 ST1300/A
12
©2006 American Honda Motor Co., Inc. - All Rights Reserved
10. Install the handlebar cover and saddlebag
lever lock.
Remove the ignition key from the ignition.
Remove the protective tape.
Attach the handlebar cover using two
4 x 6.5 mm special screws.
Torque the screws.
Torque: 1.2 N·m (0.12 kgf·m, 0.9 lbf·ft)
Open the left fairing pocket with the
ignition key.
Take out the saddlebag lever locks from the
left fairing pocket.
Insert the ignition key into the saddlebag
lever lock and turn it clockwise to the position
shown.
Push in on the saddlebag lever lock while
aligning it with the cutout in the saddlebag
as shown.
PARTS
QTY
Handlebar cover
1
Special screw 4 x 6.5 mm
2
IGNITION
KEY
4 x 6.5 mm SPECIAL SCREWS
HANDLEBAR
COVER
PROTECTIVE
TAPE
IGNITION
KEY
FAIRING POCKET
SADDLEBAG
LEVER LOCKS
CUTOUT
SADDLEBAG
LEVER LOCK
