2006 ST1300/A
14
©2006 American Honda Motor Co., Inc. - All Rights Reserved
14. Install the engine guard covers.
Install the engine guard covers and secure
them with a 6 x 11 mm pan screw.
Torque the screws.
Torque: 9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)
15. Install the fuel tank knee grip pads.
Install the optional knee pads if the customer
requests them to be installed.
If the unit has not been sold, store the pads in
the right saddlebag.
Clean the mating surfaces of the fuel tank
with a clean shop towel and isopropyl alcohol
or equivalent.
Peel off the backing sheets and attach the
pads to the sides of the fuel tank 30 mm
(1-13/16 in) from the lower front edges of the
tank, as shown in the illustration.
If the ambient temperature is 77
°
F or below,
warm the mating surfaces of the tank and
the pad’s adhesive side with a hair dryer
before attaching.
After attaching the pads, press down firmly
over the entire area of the pad to ensure
maximum adhesion.
Avoid washing the motorcycle or riding in
wet conditions for 24 hours after attaching
the pads.
PARTS
QTY
Right engine guard cover
1
Left engine guard cover
1
Pan screw 6 x 11 mm
2
PARTS
QTY
Right knee grip pad
1
Left knee grip pad
1
6 x 11 mm
PAN SCREW
30 mm
(1-13/16 in)
30 mm
(1-13/16
FUEL TANK
KNEE GRIP PADS
