59
4.
Apply
a thin coat of engine oil to the
new oil filter rubber seal (4).
5.
Install t h e new oil filter and tighten it
to:
10 Nm (1,0 kgm, 7 lbft)
(4) Oil filter rubber seal
6.
Check that the sealing washer on the Я
ВВ drain plug is in good condition and
install the plug.
Oil Drain Plug Torque:
35 Nm (3,5 kgm, 25 lbft)
7.
F i l l t h e c r a n k c a s e w i t h t h e
recommended grade oil; approximately:
2.3
l
(2.4 US qt, 2.0 Imp qt)
8.
I n s t a l l the oil filler cap.
9.
Start the engine and let it idle for 2 - 3
minutes.
10.
Stop the engine and check that the oil
level is at t h e upper level mark on the
dipstick with the motorcycle upright on
firm, level ground. Make sure there are
no oil leaks.
NOTE
:
When running in very dusty conditions, oil
changes should be performed more
f r e q u e n t l y t h a n specified in t h e
maintenance schedule.
F
I
L
T
E
R
S
/
L
U
B
R
I
C
A
T
I
O
N
