18
Brake fluid must be added to the reservoir
whenever the fluid level begins to reach
the lower level mark (4). Remove the
screws (1), reservoir cover (2), diaphragm
plate (3) and diaphragm. Fill the reservoir
with DOT 4 BRAKE FLUID from a sealed
container up to the upper level mark (5).
Reinstall the removed parts in the reverse
order of removal. Tighten the screws (1)
securely.
CAUTION:
*Handle brake fluid with care because
it can damage plastic and painted
surfaces.
*When adding brake fluid, be sure the
reservoir is horizontal before the cap
is removed or brake fluid may spill
out.
*Use only DOT 4 brake fluid from a
sealed container.
*Never allow contaminants such as
dirt or water to enter the brake fluid
reservoir.
F r o n t B r a k e F l u i d L e v e l :
⚠
WARNING
* B r a k e
f l u i d
m a y
c a u s e
i r r i t a t i o n . A v o i d c o n t a c t w i t h
s k i n
o r
e y e s .
I n
c a s e
o f
c o n t a c t , f l u s h t h o r o u g h l y w i t h
w a t e r a n d c a l l a d o c t o r i f y o u r
e y e s w e r e e x p o s e d .
Remove the seat (page 36).
Check that the fluid level is above the lower
level mark (4) with the motorcycle in an
upright position.
(1)
Screws
(2)
Reservoir cover
(3)
Diaphragm
(4)
LOWER level mark
(5)
UPPER level mark
