Honda MSX GROM 2020 Owner'S Manual Download Page 92

Page: 92 / 102

Storing Your Vehicle

If you store your vehicle outdoors, you should

consider using a full-body cover.

If you won't be riding for an extended period,

follow these guidelines:

●

Wash your vehicle and wax all painted

surfaces (except mat painted surfaces). Coat

chrome pieces with rust-inhibiting oil.

●

Lubricate the drive chain.

P. 52

●

Place your vehicle on a maintenance stand

and position a block so that both tyres are

off the ground.

●

After rain, remove the body cover and allow

the vehicle to dry.

●

Remove the battery (

P. 58) to prevent

discharge. Fully charge the battery and then

place it in a shaded, well-ventilated area.

If you leave the battery in place,
disconnect the negative

terminal to

prevent discharge.

After removing your vehicle from storage,

inspect all maintenance items required by the

Maintenance Schedule.

20200817160140_32K26J100_eng_BOOK Page 90 Monday, August 17 2020 16:04:26 JST

Storing Your Vehicle

Information

Summary of Contents for MSX GROM 2020







































































































Search results

Summary of Contents for MSX GROM 2020

Reviews:

Related manuals for MSX GROM 2020

Brands by name

Popular brands

Honda MSX GROM 2020, Owner'S Manual

Search results

Summary of Contents for MSX GROM 2020

Reviews:

Related manuals for MSX GROM 2020

Brands by name

Popular brands