SET-UP
AND ASSEMBLY
I
I
85
mm
3.4
in.
(with loader subframe)
4.0
in.
Installing Lift
Rods
on Lower Link Lift
(For Tractors With a Rear Three Point Hitch)
1.
Replace the existing left hitch rod with the unit
provided with the mower.
2. Loosen the locknut and the adjusting nuts and
turn them to position the bracket hole 85 mm
(3.4
in) from the
lift
rod eye (center-to-center
measurement). The bracket must face forward.
3.
Tighten the adjusting nuts and secure with the
locknut.
4.
Couple
lift
link chain and
lift
link with greased
16
mm lift pin. Head of pin faces inward. Secure
with washer and cotter pin. Attach upper end
of
lift link chain to bracket on
lift
rod, with greased
16
mm lift pin. Head of pin faces inward. Secure
with washer and linchpin.
14
