38
OTHER SETTING: AUTO RANGE MAX. DEPTH
Set the depth which sea bottom is searched when auto range is set.
When auto range maximum depth is set to deep, it takes long time to indicate the
depth digit and depth range sometimes becomes deep range due to malfunction. In
this case, please set auto range Max. depth to meet with the depth of sea where you
operate.
[6. OTHERS]
→
[3.OTHER SET]
→
[1.AUTO R
MAX DEP.] is selected on MENU 2.
Select the AUTO RANGE MAX. DEPTH (30m,
50m, 100m, 200m, 300m, 500m) by
RIGHT/LEFT
〔
、
〕
key.
1
2
※
When AUTO RANGE MAX. DEPTH is set, depth meter and Auto Range do
not activate at the depth more than such auto range max. depth.
OTHER SETTING: CLEAN ECHO
Non-synchronized noise like interference with other boat’s fish finder, air bubbles,
electric noise, mechanical noise, etc. is eliminated and clear display less noise is
shown.
[6. OTHERS]
→
[3.OTHER SET]
→
[2.C-ECHO] is
selected on MENU 2.
OFF : Clean Echo function is canceled.
L : Set Clean Echo to low.
H : Set Clean Echo to high.
1
2
※
When there is less noise, minute response can be displayed by selecting
OFF of C-ECHO.
OTHER SETTING: TRANSMITTING OUTPUT
Two steps of transmitting output (high, low) can be selected.
[6. OTHERS]
→
[3.OTHER SET]
→
[3.PW
REDUCER] is selected on MENU 2.
LOW : It does not detect to deep but power
consumption is less.
HIGH : It detects to deep but power consumption
is much.
1
2
