Honda GL1800 2008, Navigation System Owner'S Manual

Page: 16 / 158

16 Getting Started
Getting Started
MCAP_A 31MCAT20
Turn the ignition switch to ACC to avoid
battery drain. The ON position will also
activate the system.
After a few seconds, you will see the
following screen. (The screen may be
different or there may be no screen if you
change the default
Opening/Ending
Ceremony – or if the Navi system was
not selected the last time you turned off
the ignition. Press the DISP button under
the center display screen or the MAP
button on the right fairing panel to enter
the Navi system.)
After a few seconds, you will see:
Press the ENT button. (If you do not, the
screen will return to the multi-
information mode after about 30
seconds. To return to the Navigation
System, press the DISP button on the
center display or the MAP button on the
right fairing panel.)
The Card Information screen will appear
for about one second before a map
appears.
Startup
US_MCAP.book Page 16 Thursday, March 15, 2007 4:00 PM